Army Installation Management Command Supervisory General Engineer in Fort Leonard Wood, Missouri
Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.
About the Position:This position is located within the US Army Installation Management Command, Directorate of Public Works, Operations and Maintenance Division, at Fort Leonard Wood, Missouri. Fort Leonard Wood is located in the beautiful South-Central Missouri Ozarks. The Fort covers more than 61,000 acres and is located in Pulaski County. Bordering the installation to the north are the towns of Waynesville/St. Robert and Interstate 44. St. Louis is a two hour drive to the east along I-44 and Springfield is a little more than an hour's drive to the west of Ft. Leonard Wood.
Who May Apply: U.S. Citizens
As a Supervisory General Engineer you will:
- Providing direct supervision to a multi-disciplined professional and technical staff.
- Responsible for planning, programming, coordinating, supervising, monitoring and executing of the buildings and grounds and utilities functions for the installation.
- Performing engineering inspections, develops technical documentation and prepares analytical reports on the condition of roofs, roof trusses, exterior painting, roads, bridges, airfields, elevated structures, storage tanks, pressure vessels and utilities systems.
- Utilizing professional engineering skills and knowledge, familiarity with policies and procedures, and knowledge of the latest technological advances in facilities engineering to provide the guidance necessary to develop and program projects for the maintenance, repair and improvement of the installation's buildings, structures, roads, bridges, railroads, hardstands, airfields, grounds, and utility systems.
- Occasional Travel
- Temporary Duty may be up to 5% of the time.
- Permanent Change of station is authorized.
Who May Apply
This job is open to…
Status Candidates (Merit Promotion and VEOA Eligibles)
Questions? This job is open to 2 groups.
In order to qualify, you must meet the education AND experience requirements described below. Your resume must clearly describe your relevant experience. Your our transcripts are required as part of your application. Additional information about transcripts is in this document.
Basic Education Requirements: possess a degree in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR Education and Experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience.
Experience required: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
Your resume must describe at least one year of specialized experience which prepared you to do the work in this job. Specialized experience is defined as:: work such as developing projects for the maintenance, repair and improvement of building structures, roads, bridges, railroads, airfields, grounds, and utility systems; making recommendations to ensure sound economic engineering and architectural designs; analyzing electrical, mechanical, and sanitary facilities for optimum efficiency; designing and preparing drawings, specifications, and cost estimates for service contracts; reviewing engineering plans, specifications, cost estimates, design analyses; performing engineering inspections, developing technical documentation, and preparing analytical reports on the condition of roofs, roof trusses, exterior painting, roads, bridges, airfields, utility systems, etc.; supervising, planning, directing and reviewing work of subordinate staff.
You will be evaluated on the basis of your level of competency (knowledge, skills, abilities) in the following areas:
- Knowledge of Engineering Principles and Practices
- Knowledge of Engineering Operations and Maintenance
- Ability to Supervise Employees
- Ability to Communicate Effectively
In addition to meeting the specialized experience requirement above you must also meet the basic education requirements above also.
Other Requirements: Click here for expanded definitions.
- Male applicants born after December 31, 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- Two year trial/probationary period may be required.
- Direct Deposit of Pay is Required.
- This position may require temporary duty travel (TDY) of at least 5% of the time.
- The incumbent of this position must be able to qualify for and maintain a SECRET security clearance.
- Incumbent of this position is required to submit a Financial Disclosure Statement, OGE-450 upon entering the position and annually thereafter.
- This position requires a Professional Engineer License.
- This position requires a one year Supervisory probationary period.
What To Expect Next
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position.
If you are determined to be ineligible or not qualified, your application will receive no further consideration.
The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "incomplete application" and you will not receive further consideration for this job.
The Department of Defense offers an excellent benefits program.In addition to your take-home pay, your comprehensive compensation/benefits package will include most of the benefits described in the USAJOBS Resource Center.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitantinformation sheet.
- You may claim military spouse preference, see the information in the Military Spouse Preference Under Delegated Examining Proceduresinformation sheet.
- Multiple positions may be filled from this announcement.
- This position is a Career Program (CP) 18 position.
- Salary includes applicable locality pay or Local Market Supplement.
- Fort Leonard Wood employees may have the following available to them: work out facilities, golf course, swimming pools, tennis courts, rental program (e.g. pop up campers, trailers), ample free parking, a youth center and childcare services. Fort Leonard Wood employees may also have access to the Fort Leonard Wood Lake of the Ozark Recreational Area (LORA). LORA is a great place to get away from all the worries of everyday life.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/474196700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Open & closing dates: 2017-07-17 to 2017-07-31
Salary: $85,816 to $111,560 / per year
Pay scale & grade: GS 13
Series: 0801 General Engineering
Appointment type: Permanent
Work schedule: Full Time
Job announcement number: SWKA171569021985979D
Control number: 474196700